Aver ExpressGo Manuel d'utilisateur

ExpressGo User’s Manual Ver.1.1.1.1

4 3. If user selected Basic mode, press the Quick Settings tab. Then select the Select a different desktop mode and click Go. 4. Select the Extend

94 3.9.5 To Setup SMS/MMS Setting To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Beside

95 3.9.6 To Setup PTZ Preset Point Next to the PTZ preset point check box, click Detail. 1. Select Camera: In the Trigger PTZ Preset Setting dialog

96 3.9.8 To Setup CMS Setting Next to the Send to CMS check box, click Detail. Click OK to accept the new settings and Cancel to exit without saving

97 3.10 User Setting Users with Administrator privileges can access User Setting. The maximum user accounts are 256. In the User Setting dialog box,

98 (2) Control Right Enable the items that would allow the user to access. (3) Visible Camera Select the camera number that would allow the user to a

99 Chapter 4 Using the Remote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM3000) instal

100 Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating dom

101 II. Register the Domain Name on http://dyn.com/dns/ 1. Open the browser on your PC and enter the URL http://dyn.com/dns/ 2. Follow the DyDNS

102 Appendix B Network Service Port The following table shows the ports that NVR server uses for certain network service. Port # Variable Remote

103 LIMITED WARRANTY AVer Information Inc. warrants that this product to be free of defects resulting from faulty manufacturing or components under t

5 6. In Display Manager, right click on the second Display on the right side and select Extend Main onto monitor. 7. Adjust each monitor resolutio

6 1.2.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView, and select the Dualview mode. 2. Adjust each monitor resolution to 1024x768, 1

7 1.3 Software Installation Please read the following information before install NXU Lite NVR application. Before installing the software, mak

8 3. Read the License Agreement and click Yes to accept the agreement. If you do not agree the license agreement, the installation will be cancel.

9 1.4 Running the ExpressGO Software To run the application, double-click on your PC desktop or click Start > Programs > DVR > ExpressGO

10 Chapter 2 Using the DVR Software 2.1 Preview the Live Video After the successful login, the preview screen will be shown. User can start to

11 Name Function (1) Alarm Alert and display warning info. Only Administrator-level can reset and turn on, off and trigger the Sensor and Relay by r

12 Name Function (6) Network Enable/disable remote system access. This feature allows you to access DVR server from a remote location via internet co

13 Name Function (14) Full screen Use the entire area of the screen to only display the video. To return, press the right button of the mouse or ESC

Manual Conventions The following conventions are used throughout this manual. Caution symbol is intended to alert the user of the important insta

14 Name Function (19) Live Playback button When live playback function has enabled in Miscellaneous at System Setting, the live playback ico

15 2.1.1 Setting Up and Using the Emap Emap can hold up to 8 maps in *.bmp/*.jpg format. You may locate the camera, sensor and relay on the map. i T

16 2.1.2 To Use the Emap 1. Click Emap. 2. In the Emap screen, click the camera icon to switch on the area where the camera is located on the map

17 2.1.3 Familiarizing the Buttons in PTZ Camera Controller Name Function (1) Close Exit PTZ camera controller. (2) Camera preset position number M

18 2.1.4 Using Event Log Viewer Show the record of activities that take place in the system. i - ExpressGO system now supports HDD failure pr

19 2. Select the Date to view or search certain event log by key word. Enter the key word in Find Text column and click Search button. 3. To filter

20 2.1.5 To Setup the IP PTZ Camera 1. In the PTZ control panel, click Setup. 2. When the PTZ Setup dialog box appears, the Auto Substitution is e

21 11. Show moving direction indicator line: enable/disable to show the direction line when uses mouse drag on screen in PTZ mode. 12. Iris: To adjus

22 17. User also can click PTZ icon to call out on-screen PTZ control bar and use mouse to drag on screen to move the PTZ camera lens direction. 18.

23 2.2 Playback the Recorded Video To switch in Playback mode, click Playback button in Preview mode user interface. In wide screen mode, click 

iii COPYRIGHT © 2013 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted i

24 Name Function (5) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode, click the camera ID number to sw

25 Name Function (13) Export Export includes Snapshot, Print, Output Video Clip, and Backup function. Snapshot: Capture and save the screen shot eit

26 Name Function (17) Open file Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN

27 2.2.1 To Search Using the Visual Search 1. Click Visual Search. 2. In the Visual Search Setting dialog box, select the Camera number and the

28 2.2.2 To Search Using the Intelligent Search 1. Click on the video screen on where you want to search. 2. Click Intelligent Search. The Intelli

29 2.2.3 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text (

30 2.2.4 To Cut and Save the Wanted Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar

31 2.2.5 To Bookmark a Section of the Video 1. Click Bookmark. The video playback stops when the bookmark button is executed. 2. In the Bookmark

32 2.2.6 Watermark Verification DVR system supports watermark-checking to identify the authenticity of playback video. DVR system can only verify on

33 Chapter 3 Customizing the NVR System In the Preview screen mode, click Setup option to customize your NVR. When the ExpressGO configuration set

TABLE OF CONTENTS MANUAL CONVENTIONS ... II CHAPTER

34 If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after check box and enter the numbers

35 (6) Login Enable the conditions in Login section you want the system to automatically carry out.  Auto Login when OS start Execute the Expre

36  Desktop Lock  Block window OS hotkey: Deactivate the [Ctrl-Alt-Del] and [Windows] keyboard key functions.  Block windows OS pop-up window:

37 capacity. - Auto Scan Period Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cy

38 (10) System Configuration The System Configuration is in different display on Window XP and Windows 7. Following are described System Configuratio

39 To format and partition hard disk: 1. Click + button to add the selected hard disk into Partition Table section. 2. User can adjust the capacity

40 mapped as Network Driver in DVR server. Follow the below steps to map the network drive. i The ExpressGO doesn’t support the Map Network Drive fun

41 Others Printer Setting Click Add Printer and following the wizard to install a printer.

42 Regional/Language Setting When DVR application is using different language of UI besides English, user can select the corresponding region and lan

43 Device Management To manage the DVR system devices. Network Connection To manage the connection of the network.

3.3 RECORDING SETTING ... 67 3.4 NETWORK SETTING ...

44 Phone and Modem options To setup the modem dial-up settings. Date/Time Setting 1. Select the Time Zone of DVR server located 2. Select the Mont

45  Windows 7 In System Configuration section, user can setup keyboard language, printer, PPPoE setting, Audio, Phone and Modem, Map/Disconnect net

46 Memory Displays DVR system’s memory usage. Network Displays DVR system’s network usage. Click drop-down list to select LAN2 and view LAN2 usage

47 CameraInfo Displays DVR system’s cameras information – Camera name, ftp in Live and Recording, and current status. In Status, a is analog camera c

48 S.M.A.R.T Displays DVR system’s hard disk information. User can view information of each hard disk or hard disk portion on DVR system. Double-c

49  Keyboards/Input methods Select the keyboard or input language.

50  PPPoE Setting To configure the LAN setting of DVR system. 1. Click PPPoE Setting. 2. Then, the DVR system will require rebooting th

51 3. After DVR system reboot, Click Setup >> System >> System Configuration >> PPPoE >> Add button >> Broadband(PPPoE

52 4. Enter the PPPoE’s User name and Password. Mark Remember this password and keep Connection name as default -- Broadband Conne

53 6. User will see the name of PPPoE connection that user has setup list in Dial-up and Virtual Private Network settings. 7. Then, click OK and re

54  Sounds Setting Adjust audio volume of system.  Printer Click Add Printer and following the wizard to install a printer.

55  Device Management To manage the DVR system devices.  Phone and Modem options To setup the modem dial-up settings.

56  Map Network Drive To add network storage, the Internet storage drive/folder must be mapped as Network Driver in DVR server. Follow the below st

57 3.2 Camera Setting In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default

58 (5) Use IPCAM motion detection Enable to use the motion detection function of IP camera if the IP camera has support motion detect

59  Auto Search: User can click Auto Search to find the IP camera that can be detected by NVR system on the LAN network. IP Camera Information sect

60 After clicking the camera, user can configure IP camera’s IP, Mask, Gateway, and Web port. Also, user can change camera’s IP mode – DHCP or Static

61  I/O Control: To setup the sensor and relay devices that is installed on IP camera.  Sensor Setting: To setup sensor that is embedded on the

62  Relay Setting: To setup relay device that is embedded on the camera. 1. Click the drop-down list and select the relay ID number. 2. Enter rel

63 3.2.1 Create a Camera Group Follow the below steps to create a camera group. The maximum of group number is 64. The default group can be deleted

1 Chapter 1 Introduction AVer ExpressGO is a DVR application that can connect up to 32 AVer IP cameras for monitoring, recording, and playback. 1.1

64 3. Drag the camera from Camera list section to the group. 4. Right-click the camera can rename, delete, display/no display video of camera, and

65 9. User can easy to view and manage the camera group in preview/advanced mode by click camera tree icon (see also Chapter 2.3(11) Camera Group Tr

66 3.2.2 IP camera PnP Setup To connect AVer IP camera series without any configuration; just easy as plug and play. i - The IP camera PnP setup no

67 3.3 Recording Setting In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to

68  Daily Record Mode: Setup the recording schedule by date. 1. Select the date from calendar. 2. Then, select the recording mode – Always, Motio

69 (3) Motion Detection Adjust the sensitivity of the motion detector. The higher the value, the finer the sensitivity is detected. When it detects a

70 3.4 Network Setting In the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Defaul

71 (5) Network Time Synchronization Adjust the NVR system time same as network time server. Fill in the Time Server IP address or domain name. Select

72  Enable HandyViewer Enable remote users to use a PDA or a mobile phone to access ExpressGO system and select the video size and quality.  N

73 3.5 Schedule Setting Schedule to record, backup, enable network, reboot and disable alarm of all the cameras either weekly or one time. The numbe

2 16CH NXU System Item Recommended Motherboard Intel G41/P43/X58/H55/P55/H61/H67/P67/Z68 chipset CPU Dual core CPU is highly recommended RAM 4G

74  Delete or overwrite old backup file when the HDD is full: The NVR system will automatically erase the old backup data when the hard disk is ful

75 3.5.1 To set schedule at a specific portion of time in that hour 1. Right click the colored blocks. 2. In the Select time dialog box, click t

76 3.6 Backup Setting In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 repr

77  To set backup time at a specific portion of time in that hour 1. Right click the colored blocks. 2. In the Select time dialog box, select t

78 3.6.1 Setup Quick Backup Set a quick backup rule for user can pressing Ctrl + B to execute backup instantly. 1. Click Quick Backup 2. In Quick

79 3.7 Sensor Setting The I/O device must be installed to use this function. The NVR system also support external I/O box and user can install exter

80 3.8 Relay Setting The I/O device must be installed to use this function. To set the Relay Setting: 1. Click the drop-down list and select

81 3.8.1 To Setup External I/O Box i NVR system needs to purchase and install the E-I/O box in order to have the sensor and relay connection. The N

82 8. To add more than one external I/O box, click Add and follow the above steps. 9. In External I/O box setup dialog, user will see all added Ex

83 12. All connected External I/O box and their modules will be listed as tree topology in External I/O Setup window. 13. To view the all I/O devic

3 1.2 Dual Monitors Setup The ExpressGO supports Single and Dual monitor displays. When using dual monitors, the Emap and Playback function will be

84 3.9 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm setti

85 the system to alarm. Right-click on the camera number to setup the system to send out the alarm when motion has been detected last the time that u

86 6. In (5) Abnormal Event to set the condition of the event for system to alarm.  System Reboot: when the NVR system reboot without abnormal co

87 8. To set sensor status of IP camera, click (9) IP Camera Sensor. In IP Camera Alarm Setting window, click High/Low to set sensor status. 9. In

88  IP Camera Relay Set to enable/disable the relay operation when the alarm is activated.  Play Warning Sound Play alarm sound. To setup click

89  Snapshot Take a snapshot when the alarm is activated. a. Select Camera: specify which channel video to be snapshot when the alarm is occurred.

90 3.9.1 To Setup the Alarm Sound Setting 1. Beside the Play Warning Sound check box, click Detail. 2. In the Alarm Sound Setting dialog box, cl

91 3.9.2 To Setup Send E-mail Setting Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exit and save the

92 3.9.3 To Setup FTP Setting 1. Beside the File Transmission via FTP check box, click Detail. 2. In the FTP Setting dialog box, enter the FTP IP,

93 3.9.4 To Setup Alarm Recording Setting 1. Beside the Start Recording check box, click Detail. 2. In the Alarm Recording Setting dialog box, sel