Aver EXR6004-WiFi Manuel d'utilisateur

AVerMedia® AVerDiGi EXR6004 WiFi User Manual July 2010

4 1.3 Back Panel Name Function (1) WPS button Pressing to enable the WPS function. (2) 2* USB 2.0 ports For USB keyboard, mouse, and other USB de

94 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco

95 8.2.2.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click

96 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

97 8.2.2.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm s

98  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sys

99 - Send E-mail Send an electronic text message. Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exi

100 - Send to CMS (Central Management System) Enable/disable the selected camera to send video to CMS when the alarm is activated. Beside the Send t

101 8.3 Remote Backup Remote Backup is purely for backing up the *.dvr file from the DVR sever. You can select between Auto Backup and Manual Backup

102 - Click Schedule to select/unselect the time you want to backup. The red block turns white when it is unselected. - Enable/disable Disk Recyc

103 8. For manually backup, click File select button and select the DVR to backup.

5 1.4 Setting Up the DVR Unit 1.4.1 Installing the Hard Disk i - For hard disk spec, please referring to http://www.avermedia.com/AVerDiGi/Produc

104 Appendix A Registering Domain Name DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for t

Warranty Notice LIMITED WARRANTY AVerMedia Information, Inc. warrants this product to be free of defects resulting from faulty manufacture or compo

6 5. Secure the hard disk inside the unit then place unit cover 6. Push the cover forward and secure the cover 7. You may now connect all the

7 1.4.2 Connecting Devices The back panel of the DVR unit, user can connect the 4 sensor devices, 1 alarm device, audio input/outp

8 1.4.3 Connecting the Audio, Sensor and Relay device The Sensor, Alarm, and audio port enable you to connect 4 sensor inputs, 1 relay outputs, and

9 Chapter 2 Operating the DVR unit 2.1 The Way to Operate DVR  Using mouse and keyboard Connecting the mouse and keyboard through USB interface,

10 2.2.1 To Connect the Wireless IP Camera There are two to connect with the IP camera, one is through the WiFi signal and another one is using Ethe

11 2.2.1.2 Connecting IP Camera Through the Ethernet Cable In such following condition, user can connect the IP camera by using Ethernet cable. 

12 2.2.2 To Format the Hard Disk The hard disk must be formatted before can be used to record the video. 1. Click Setup and enter the ID and passwo

13 2.3 Familiarizing the Buttons in Preview Mode Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the

FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may n

14 Name Function (14) Full screen View in full screen. To return, press the right button of the mouse or ESC on the keyboard or click

15 2.3.1 Setting Up and Using the Emap E-Map can hold up to 8 maps in *.jpg format. You may locate the camera, sensor and relay on the map. 2.3.1.1

16 2.3.2 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main inte

17 2.4 To Playback the Recorded Video To switch in Playback mode, click Playback button at the lower right corner of Preview mode user interface.

18 Name Function (5) Date Select the date on the calendar and the time to start playing the recorded video file. The numbers from 00 to 23 represen

19 Name Function (15) Find Next Search for the next event or changes in the motion detector frame. You can use this when you are using Event Search

20 2.4.3 Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search Setting dialog

21 Chapter 3 Customizing the DVR System In the Preview screen mode, click Setup( ) button to customize your DVR. Enter the ID and pass

22 - System Date and Time: Click Setup to select the current time and date. - Server IP: Click Setup to configure the IP mode of the DVR system. 

23 record the video and preview it in playback mode. - Enable Audio Enable/disable audio of the camera. - Show signal strength indicator To display

WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE

24 oldest data. (5) Country & Language Select the location of the DVR unit and customize the system to display the tool tips and dialogs based

25 (9) Login Enable the conditions in Login section you want the system to automatically carry out. - Auto Login after system boot up Execute th

26 3. Select the USB disk if there is more than one USB disk from drop down list. The DVR unit will auto detects the firmware. 4. Click OK to start

27 3.3 Camera Setup The DVR system supports 4 Wireless IP camera connections. Click Default will back to the factory default value. 3.3.1 To Setup

28 Authentication check box and enter the ID and password of the IP camera. The URL is not supported in here. To exit the IP Camera Settings windows,

29 3.3.2 To Setup Camera from the Remote DVR User can add the camera from another DVR through the network. (1) Camera Icons Select the camera numbe

30 - Connect Click to connect the camera when all configurations are set. 3.4 Recording Setup (1) Camera Icons Select the camera number you want t

31 3.5 Network Setup Click Default will back to the factory default value. (1)(2)(3)(4)(5)(6)(7)(8) (1) Server Name Assign a name for the DVR unit.

32 address - DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP addresses. Enter the IP address of DNS if it is available

33 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

Table of Contents Chapter 1 Introduction ... 1 1.1 Package Co

34 3.6 Schedule Setting Schedule to record, enable network, reboot and disable alarm of all the cameras either weekly or one time. The number from 0

35 3.7 Backup Setup In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 repres

36 3.7.1 Using QPlayer to Playback Backup Video You can playback the backup files using QPlayer applications on the PC. When you back up the recorde

37 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI

38 3.7.2 To Cut and Save the Portion of the Recorded Video 1. Use the Playback Control buttons or drag the bar on the playback progress bar and pau

39 3.7.4 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2. Click Event Search. The Event Search text

40 3.8 Sensor Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the sensor ID number. 2. E

41 3.9 Relay Setting The I/O device must be installed to use this function. 1. Click the drop-down list and select the relay ID number. 2. Ent

42 3.10 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm sett

43  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sy

3.8 Sensor Setting ... 40 3.9 Relay Sett

44 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it stops the

45 - Start Recording Record the video from the selected camera. 1. Beside the Start Recording check box, click Detail. 2. In the Alarm Recording

46 3.11 User Setup Only administrator level authority can access User Setting. The maximum user accounts are 32. In the User Setting dialog box, cli

47 using internet explorer. - Remote Console Allow the user to remote modify DVR system setting. - Remote LogViewer Allow the user to view the even

48 Chapter 4 Using the USB Playback Console 4.1 Recommended system requirements Pentium® 4 2.4GHZ or above Windows® 2000/ XP DDR 256 MB Gra

49 4.3 Running the USB Playback Console To run the application, click the icon on the PC desktop Name Function (1) Exit To close the applicatio

50 Name Function (4) Open File To select the video file source for playing. - DVR Recorded File (HD): To playback the recorded video from the h

51 Name Function (15) Split Screen Mode Select from different screen view to playback the recorded video file of the entire camera or one camera on

52 4.3.3 Playback Backup File(*.dvr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK. 3. Locate the backup file folder and c

53 4.3.4 To Backup Recorded File HDD backup function allows user to backup recorded file from hard disk. 1. Click Adv. Function → HDD Backup on U

8.2 Remote Setup ... 88 8.2.1 To Add DV

54 Chapter 5 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video pic

55 Name Function (13) Sharpness Improve the overall image by enhancing edges. This gives the image more depth. (14) Effects Gray Scale: convert the

56 Chapter 6 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature

57 6.1 Familiarizing the Buttons in WebViewer Right-clicking on the WebViewer video screen, enables you to start video recording, change video qua

58 Name Function (14) Select cameras to view Select to the view camera from different server. In Select Camera dialog box, Display column, click to

59 6.1.1 To Setup Remote System Setting The setting here applies to Remote DVR only. 6.1.1.1 System Setting In the System Setting window, click Upd

60 Automatically start video recording when the DVR is executed. - Auto start Network after system boot up Automatically connect to network when the

61 (5) IP Camera Information Click IP setting to view IP camera’s detail information. User can view current connected wireless IP camera information

62 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli

63 6.1.1.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default t

1 Chapter 1 Introduction AVerdiGi EXR6004 WiFi is the instant video surveillance system that can be fully installed by anyone in less than 3 minute

64 - Smart Recording Automatically switch to recorded at the maximum frame rate setting once a motion is detected and if there is no motion, it reco

65 6.1.1.4 Network Setting In the Network Setting dialog box, click Update to accept the new settings, click Exit to exit without saving, and click

66 - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.

67 6.1.1.5 Alarm Setting In the Alarm Setting dialog box, click Add to insert and set new alarm setting, click Delete to remove the selected alarm s

68  Reboot: when the DVR system reboot without abnormal condition, the system will send out the alarm message.  Abnormal Reboot: when the DVR sys

69 - Send E-mail Send an electronic text message. Beside the Send Email check box, click Detail. In the E-mail Setting dialog box, click OK to exi

70 - Send to CMS (Central Management System) Enable/disable the selected camera to send video to CMS when the alarm is activated. Beside the Send to

71 6.2 Familiarizing the Buttons in Remote Console Name Function (1) Exit Close the Remote Console. (2) Split Screen Mode Select from 3 di

72 6.2.1 To Setup Remote Console Setting Click Setup button to call out the System Setting window. Click OK to exit and save the setting and Cancel

73 6.3 Using the Remote Playback To use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, cho

2 1.1 Package Content The package content has two parts – DVR unit and Wireless IP camera. (1) (2) (3) (4) (5) (6) (7) (8) (1) AVerDiGi

74 6.3.1 Familiarizing the Buttons in Local Playback Name Function (1) Split Screen Mode Select from 6 different split screen type to playback t

75 Name Function (5) Playback Control Buttons Begin: Move at the beginning of the recorded video file. Previous: Go back to the previous frame. Slowe

76 Name Function (13) Full screen View in Playback-compact mode. To return, press the right button of the mouse or ESC on the keyboard. (14) Event Lo

77 6.3.2 Familiarizing the Buttons in RealTime Playback Name Function (1) Split Screen Mode Select from 6 different split screen type to playback

78 Name Function (6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. – OPEN FI

79 6.3.3 Familiarizing the Buttons in Download and Playback Name Function (1) Exit To close the application. (2) Progress bar Show the progress o

80 Chapter 7 Using HandyViewer to Access DVR Server Users can use a mobile phone to access the DVR through Internet. Make sure

81 4. When you are prompted, click Yes to install the application using the default directory. 5. When done, click OK. 7.1.2 To install PDAView

82 7.1.3 To Use the PDAViewer 1. Run the PDAViewer in the Programs. 2. Familiarizing the PDAViewer buttons. (7)(6)(5)(3)(4)(8)(9)(10)(1)(2) Name

83 3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the popup menu will

3 1.2 Front Panel Name Function (1) DVR Power LED Light when the unit is power on (2) HDD LED Indicate the hard disk running state. Light when

84 11. User can change the relay status. Select the relay and tap on video screen longer the pop up menu will appear, and then, select the status (

85 7.2 Using JavaViewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the DVR through Internet. Make sure

86 7. The JavaViewer support PTZ control function, you can refer to Help file for detail function control key. Select menu and go the way down to se

87 Chapter 8 Web Tools The bundled Web Tools includes Dispatch Server , Remote Backup, and Remote Setup program. To install Web Tools, place the CD

88 8.2 Remote Setup Remote Setup is a tool for configuring DVR server from remote site. To install Remote Setup application, insert the Installation

89 6. When connection is lost, click Reconnect to connect again. 7. To modify or delete the added DVR server, select the DVR server from listing an

90 - Auto Scan Period Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next video in cycle depend

91 Enable/disable audio of the camera. - Name Change the camera name - Description Add a short comment (5) IP Camera Information Click IP setting t

92 Remote DVR Camera Setting Select the camera to modify settings. In the Camera Setting window, click Update to save and apply the new settings, cli

93 8.2.2.3 Record Setting In the Recording setup window, click OK to accept the new settings, click Exit to exit without saving, and click Default t