AVer SF2012H Guide de l'utilisateur télécharger pdf (Page 13)

3.2 Hardware Installation

1. Connect power adapter.

2. Connect IP camera to PC or network with Ethernet cable.

3. Set up the network configurations according to the network environment.

3.3 Factory Default

1. To recover the default IP address and password, please follow the following steps.

2. Remove power, and press and hold the button in the back of the IP camera.

3. Power on the camera. Don’t release the button during the system booting.

4. It will take around 30 seconds to boot the IP camera.

5. Release the button when camera finishes proceed.

6. Re-login the camera using the default IP (192.168.1.200), and user name (admin), password

(admin).

Connect Power adapter

Connect Ethernet cable

LED indicator

Reset button

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 32 33

Pas de commentaire

AVer SF2012H Guide de l'utilisateur Page 13