Aver SF2111H-DVR user manual Manuel d'utilisateur

AVer SF2111H-DVR User Manual

6 Hardware Installation and I/O Pin Assignment 1. Remove the dome cover, and you will see the structure as below. 2. Connect power adaptor, t

7 3. Installation Tips In order to ensure IP66 waterproof level, please install the vandal dome according to the instruction. a. The Unused cable o

8 e. Use the 3-Axis bracket to adjust the camera to appropriate angle. f. Before you close the dome cover, make sure that the black rubber band

9 4. I/O Interface I/O Connection a. Please connect the GND & DO pin to the external relay (buzzer) device. b. Please connect the GND & DI

10 Power Over Ethernet (PoE) Set up the IP camera through Power over Ethernet (PoE). PoE is a technology that integrates power into a standard LAN in

11 IP Assignment There are two ways to find IP Camera: − Finding IP Camera by using “NXU Lite recording software” − Finding IP Camera by using “IP

12 3. Click “Setup” button. 4. Click “Add IPCam” button. 5. Select “IP Camera” item.

13 6. Key in IP Camera’s ID and Password (default is admin/admin) and click “Auto Search” to find camera. 7. In Search Result window, click it the

14 Finding IP Camera by using “IP installer” 1. Use the software, “IP Installer” to assign the IP address of the IP camera. The software is in the a

15 IP Installer configuration: 6. IP Installer will search all IP cameras connected on the LAN. The user can click “Search Device” to search agai

16 Using DHCP Server/Router Network To use DHCP, please check DHCP and click “Submit” then click “OK”. It will apply the change and reboot the Device

17 Using NON-DHCP Server/Router Network In Non-DHCP server/router network, the static IP address must be assigned to the device each time when addin

18 IP camera IP addresses: 8. A quick way to access remote monitoring is to left-click the mouse twice on a selected IP camera in “Device lists”

19 9. Then, please key in the default “User name” and “Password”, both of which are “admin”.

20 Install ActiveX Control The first time you attempt to view the camera video via Internet Explorer, it will ask you to install the ActiveX componen

21 5 When the following dialogue box appears, click “Yes”.

22 Using the IP Camera Browser Interface The admin have the full access to the IP camera browser interface. The menu on the left, you can expand and

23 Name Function (3) Bandwidth Show current IP camera’s transmitting bandwidth (4) FW Version Show IP camera’s current firmware version (5) Lo

24 System > General In this section, only admin level is authorized to configure the IP camera system maintenance and the date and time settings.

25 Name Function (4) Firmware Upgrade Upgrade the firmware to the latest version. To Upgrade the IP Camera Firmware 1. Download the file from ou

Table of Contents PREFACE ...

26 System > General > Date & Time In the “Date & Time” tab, the administrator can set and update the system’s date and time. After fil

27 Name Function (4) Setting Method Select the date & time settings method. Sync with current PC – Obtain the date and time setting on the c

28  Add user: Enter the user name in “Username”, the password in “Password”, and re-enter the password in “Confirm”. Then, click “Add/Set”.  Use

29 System > Network Setting > Setting  Device Name: Used to name the IP camera to search more easily for this specific one among all connecte

30 System > Network Setting > Sever Used to send out the video via Email or FTP, or to save on NAS.  Mail Setting: Used to send out the video

31  NAS Settings: Used to send out the video to NAS server. a. Enter necessary information in “Location”, “Workgroup”, “Account Name” and “Password

32  Status - Common warning message: Updating! Failed(1), Please check your DNS setting. Failed(2), Please check your internet connection. Failed(

33 System > Network Setting > Other 1 User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to s

34  RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecting. TCP connection uses RTSP Port (554). UDP connection uses RTP Start

35 System > Network Setting > Other 2 Multicast Setting (based on the RTSP Server): User can setup two streaming based on the RTSP Server.

SYSTEM > ADVANCE > HTTPS ... 40 SYSTEM > ADVANCE >

36 Step 2: Step 3: Select Media/open network stream 3. Select force multicast RTP via TRSP 2. Select Demuxers and RTP/RTSP 1. Select all

37 Step 4: Input rtsp://[IPCAM Address] / [RTSP Path] The URL address should be the same as the RTSP path in Video Stream (System-->Video Stream)

38 [Notice] a. If the received image is not from the required IP camera, please adjust the value. (Change either IP Address or Port number) b. If

39  Bonjour: This function enables MAC systems to link to this IP Camera. Please key in the name here.(Safari supports Bonjour protocol)  LLTD: If

40 System > Advance > HTTPS HTTPS (Hypertext Transfer Protocol Secure): Https can help protect streaming data transmission over the interna

41 Created Request: Setting the secure identification and apply it. There are two ways to set Certificate- Install Signed Certificate or Create Self

42 System > Advance > SNMP SNMP (Simple Network Management Protocol) provides a simple framework for administering networked hardware. To mana

43  SNMPv3: For data security reason, the authentication and encryption assurances are added when developing SNMPv3. The user has to give not only

44 System > Advance > Access list You can deny an IP address or a range of IP address so that they cannot access the IP camera. Tick the "

45 System > Advance > QoS/DSCP QoS/DSCP (Quality of Server/Differentiated Services Code-point) specifies a simple mechanism for classifying and

1 Preface The SF2111H-DVR is an H.264 2-megapixel; full HD vandal dome camera designed for indoor and outdoor use with a mechanical IR-cut filter and

46 System > Image Admin and operator levels can adjust the Image setting. There are 5 tabs: OSD, Preference, Exposure, Advanced, and Privacy Mas

47 System > Image > Preference In Preference tab, you can tune the IP camera white balance, change the video orientation, and adjust the brigh

48 System > Image> Advanced Click Default button will back to factory default setting.  Sense-UP: The main purpose of sense-up is to provide

49 System > Image> Privacy Mask For the security purpose, there are three areas can be setup for privacy mask. Click Area #(Area 1, Area 2, Are

50 System > Video Stream > General  Input Resolution: Select the video resolution that is the maximum resolution supported in Stream 1 and Str

51 System > Video Stream > Stream1  Basic Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can be chosen --

52  VBR: 1(Low) ~10(High) – Compression rate, the higher the compression rate, the better the picture quality is; vise versa. The balance between V

53 System > Video Stream > Stream2  Basic Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can select -- 192

54  Advanced Mode Click Apply to save the configuration. − Resolution: There are 5 resolutions can select -- 1920x1080, 1280x720, 640x480, 320x240,

55 System > Video Stream > Stream3 3GPP Streaming is designed for mobile viewing.  Stream 3 Setting: Enable or Disable 3GPP Streaming.  3GP

2 Hardware Audio Out 1 Power Over Ethernet Yes Power Consumption DC 12V 3-Axis Gimbal Adjustments Angle Pan: 348∘ Tilt: 30∘~ 90∘ Rotation: 36

56 System > Audio IP camera supports 2-way audio (mono). User can send audio from IP camera built-in MIC (depending on different models) to remote

57 System > SD Card Please insert microSD/SDHC card before use it. Make sure pushing microSD/SDHC card into the slot completely. [Note]The use of

58 Event > Arrangement > Motion Motion Detection: IP camera allows 3 areas motion detection. When motion is triggered, it can send the video to

59 Event > Arrangement > Preference  Record File:  File Format: IP camera allows 3 different types of recording file to change its record si

60 Event > Schedule  Schedule: After complete the schedule setup, the camera data will be recorded according to the schedule setup.  Snapshot: A

61 Event > DI/DO IP camera supports 1 input/1 output (depending on different models). When input is triggered, it can send the video to some speci

62 Output Setting: Mode setting: OnOff Switch: Relay status is based on sensor triggered times. Time Switch: To restore the origin

63 Network Configuration  Configuration 1 a. Internet Access: ADSL or Cable Modem b. IP address: More than one real IP c. IP camera and PC con

64  Configuration 2 a. Internet Access：ADSL or Cable Modem b. IP address：one real IP c. IPcamera and PC connect to the internet d. Device need

65 Factory Default 1. To recover the default IP address and password, please follow the following steps. 2. Remove power and Ethernet cable, press

3 System Security Password Protection, QoS/DSCP, IP address filtering, HTTPS encryption, data transmission Firmware upgrade HTTP mode, can be upgra

66 Troubleshooting Here are some useful tips on how to solve some common problems. Problem Solution I forgot the account and password for SF2111H-

67 Appendix SF2111H-DVR is compliant with microSD/SDHC card and to ensure recording quality, and please use memory cards over 2G and Class 4 above (M

68 COPYRIGHT © 2012 AVer Information Inc. All rights reserved. All rights of this object belong to AVer Information Inc. Reproduced or transmitted in

69 Limited Warranty AVer Information, Inc. (“AVer”) warrants that the applicable product (“Product”) substantially conforms to AVer’s documentation f

70 Governing Law and Your Rights This warranty gives you specific legal rights; You may also have other rights granted under state law. These rights

4 Package contents Item Descriptions 1. SF2111H-DVR 2. Accessory pack 3. RJ45 socket 4. Power Adaptor(DC 12V/1A) (Optional) 5. CD (User’s

5 Product Installation Monitor Setting 1. Right-click on the desktop. Select “ Properties” 2. Change “Color quality” to “Highest (32-bit)”.