Aver SF2111H-DVR user manual Manuel d'utilisateur télécharger pdf (Page 69)

Factory Default

1. To recover the default IP address and password, please follow the following steps.

2. Remove power and Ethernet cable, press and hold the button for 10 sec. Please refer to the

picture below.

3. Connect power and Ethernet cable to the camera again. Power on the camera. Don’t release the

button during the system booting.

4. It will take around 30 seconds to boot the camera.

5. Release the button when camera finishes proceed.

6. Re-login the camera using the default IP (http://192.168.1.200)

or DHCP, and user name (admin),

password (admin).

1 2 ... 64 65 66 67 68 69 70 71 72 73 74

Pas de commentaire

Aver SF2111H-DVR user manual Manuel d'utilisateur Page 69